DescriptionThe Cel-Fi GO for Telstra will boost voice and mobile internet for multiple mobile devices. Cel-Fi GO Repeater is LEGAL for use in Australia and APPROVED for use by Mobile Network Operators. * This listing is for just the Cel-Fi GO repeater.Coax cables and antennas are not included.Please refer to Related Products for Coax and Antenna Options. It is not just an amplifier, but a Smart Repeater which dynamically adjusts its gain and connection status to provide optimum mobile signal quality.Suitable for distribution of 3G/4G mobile signal within Home Workshops and Commercial buildings etc. As the signal available from the mobile network drops, the Cel-Fi repeater increase its boost level by up to 100dB drastically reducing dropped calls and slow data in mobile black spots.Designed for fixed building installations.Up to 100dB of dynamic system gain.Provides a coverage area sufficient for between 5 and 20 simultaneous users, depending on the activity.Connects to 3G 850MHz (B5) or 4G 700MHz (B28) or 1800MHz (B3). *Note – Connects to only one 3G or 4G service at a time.Locked to Telstra’s Mobile Network.Can set to automatic or manual band selection.SMA type outdoor antenna connection for mobile network connection.SMA connector for attaching for indoor coverage antenna.Carrier approved and legal for use in Australia.Band Selection Button – Note that the GO will connect via only one band at a time.Bluetooth WAVE App for iPhone, Android & ComputersNotes regarding 3G and 4G mode selection. Cel-Fi GO will boost a single band at a time, connecting via 3G 850, 4G 700 or 4G 1800.It will not boost 3G and 4G at the same time. Unless you specifically require 4G, it is highly recommended to leave the GO in 3G mode to ensure voice calls are received on older and newer phones.Voice over 4G (VoLTE or Vo4G) will only work in selected areas and with later model phones.This version does not include any Coax cables or Antennas antenna.This kit can be connected to existing 3G/4G antennas and is a good replacement for illegal repeaters.Please select the coax cable type and length needed. An outdoor network antenna and indoor distribution antenna are required.Cel-Fi is covered by a 24 month warranty.® is a registered trade mark of Telstra Corporation Limited.*Note that this guaranty assumes that there is actually signal available to your location.SpecificationsFREQUENCYUMTS/3G 850 – Band 5 Uplink: 824 – 849 MHz, Downlink: 869 – 894 MHz 4G 700/1800 – Band 28 & 3 Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz (Will boost only one band at a time)DATAUMTS / HSPA / HSPA / 4G LTE (FDD)GAINUp to 100dB system gain (Go Stationary) Up to 70dB system gain (Go Mobile)BOOSTING THRESHOLDWill only boost between these signal levels: 3G: -80dBm and -104dBm 4G: -95dBm and -119dBmBAND SELECTIONButton for band selection: 3G: 850 4G: 700 or 1800 (strongest signal) AUTO: 850, 700 or 1800 (strongest signal)NETWORK UNITH: 28mm W: 87mm L: 255mm Weight: 600gENVIRONMENTOperating Temperature: 0° to 65°C Storage Temperature: -25° to 65°C Relative Humidity: 0 to 95% noncondensingPOWER12 VDC via external supply External Supply: 100-240 VAC, 47-63Hz Power Consumption: <15W per unitINTERFACESExternal Antenna Ports: Donor and Service SMA Female Programming Ports: Mini-USB Bluetooth Low EnergyWARRANTY24 monthsCERTIFICATIONSCE Mark C-TICK FCC RCM
